You can fix most household plumbing repairs and even update plumbing fixtures with just a few special tools and a little elbow grease. The work isn't physically challenging. But you do have to know the differences between the many types of pipes, fittings, glue, and solder because that's one big area where DIYers often mess up. In addition to not using the right parts, DIYers also make these other common mistakes. Here's how to avoid the top 10 most common plumbing mistakes and get the job done right.
There are many different types of pipes used in plumbing, and each has its own advantages and disadvantages. The most common types of pipes used in residential plumbing are copper, PVC, PEX, and ABS. Each type of pipe has its own unique properties, so it's important to know which one is best suited for your particular project.
One of the most common mistakes DIYers make is not measuring the pipes correctly. This often leads to pipes that are too short or too long, which can cause major problems. Always take careful measurements of the pipes before you cut them.
Another common mistake is not cutting the pipes straight. This can lead to problems when trying to connect the pipes, as they may not fit together properly. It’s important to use a pipe cutter or another type of cutting tool that will ensure straight cuts. This is usually a job to be left up to professionals, as we at Millennial Plumbing and Tankless have all the right equipment to properly and safely handle your pipes.
After cutting the pipes, it's important to remove any sharp edges with a process called "deburring." This can be done with a deburring tool or a file. Not deburring the pipes can lead to cuts or scrapes when handling the pipes.
Before connecting the pipes, it's important to clean them. This will remove any dirt, grease, or other contaminants that could prevent a good connection. You can clean the pipes with a solvent or a brush.
When connecting two pieces of pipe, you must use the right glue or solder. The right products will depend on the type of pipe that you're using. We are always happy to help you make the decision on what’s best for your plumbing.
After the pipes are connected, it's important to check the pressure. This will ensure that there are no leaks. You can check the pressure with a pressure gauge.
Once the pipes are connected, you must cap them. This will prevent water from leaking out. You can buy caps at most hardware stores.
After the pipes are connected, you should inspect them or have a professional inspect them. This will ensure that they're properly connected. You should look for any leaks or cracks.
When connecting pipes, you must follow safety precautions. This includes wearing gloves and eye protection. You should also avoid working in areas where there's a risk of explosion.
Whether you're connecting pipes for your home or business, it's important to follow the proper procedures. Doing so will help ensure that your pipes are properly connected and that your DIY project is being done correctly. Otherwise, working with a reliable plumber is the answer.
If you need
emergency plumbers in Dacula, come to Millennial Plumbing and Tankless. With over 25 years in the local plumbing industry, we are a family-owned and operated plumbing service provider ready to provide a lasting solution to your plumbing issue. You work hard for the house; we will work just as hard to take care of it for you. We pride ourselves on providing true craftsmanship while delivering good old fashion customer service.
Lawrenceville / Duluth / Braselton / Monroe / Suwanee / Athens / Covington / Buford / Loganville / Dacula / Alpharetta / John's Creek
Millennial Plumbing & Tankless
470-727-6292 (call or text)
millennialplumbingandtankless@gmail.com
Serving All of Metro Atlanta