Signs You Need to Repair Shower Valve and How to Do It
Signs Your Shower Valve Needs Repair
One of the most common issues homeowners face is a faulty shower valve. Although a shower valve is designed to last many years, it can eventually become worn out or damaged, leading to leaks and other problems. If you're unsure whether your shower valve needs to be repaired or replaced by a plumber, here are some signs to look for.
In this post, we’ve outlined five signs that indicate you need to fix your shower valve and how to do it yourself. See below if one or more of these signs are present in your shower and see how you can handle it properly.
1. Worn Down Valves
Your shower valve won't last forever. With regular use, the valve seals will wear out and cause leaks. The valve's bearings can also wear down, which impacts its function and causes temperature changes.
If your shower valve is starting to wear out, you may need to get it repaired. This is a common issue for large families and homes with old plumbing.
2. Knobs are Not Working
If it's tough to turn on your shower, it must be fixed. And if you turn it to the cold side, the water should come out cold. If this is not happening, then you need to take a look at your shower valve.
If the knob or handle is resistant, the shower valve is out of alignment. This problem can come from damage, corrosion, or other issues. You should take care of it immediately so it doesn't worsen.
3. Leaking Is Present
If you notice that your showerhead is dripping or your pipes are leaking, it's likely a sign of a plumbing issue. After you turn off the water, your showerhead may continue to drip or have a constant leak. This often means the shower valve is losing its seal and can't stop the water anymore.
Although leaks may seem minor inconveniences at first, they can quickly become more extensive and expensive problems. If your shower has some leaking, it could be for several reasons. The valve cartridge may be faulty, or there could be other issues. For this reason, it might be better to reach out to a plumber to quickly identify the problem and get your shower back to normal.
4. Water Temperature and Pressure Have Changed
Sudden changes in water temperature can make for a very unpleasant shower. Whether the water turns too hot or too cold, it can be quite a shock. There are several possible causes for this. In some cases, your shower valve could not be mixing the hot and cold water properly.
Alternatively, the plumbing could be suffering from general wear and tear. In other cases, the water heater might be the problem.
5. Water Pressure is Low
A healthy shower valve is vital for a working shower. The valve controls the water pressure and directs the water to either the shower head, the tub faucet, or both. However, over time, mineral deposits can build up inside the valve, causing it to become clogged and decreasing water pressure.
If you've noticed that your shower doesn't seem to be as powerful as it used to be, it's probably time to clean or replace your shower valve.
Conclusion
The shower valve is responsible for setting the water temperature, maintaining water pressure, and sending water from the tub spout to the shower. If your shower valve has temperature, pressure, or flow problems, it can be frustrating. In fact, it's never fun taking a cold or scalding hot shower.
Getting your shower working correctly, as soon as possible, is vital. This is why you must reach out to plumbing experts to assess and fix it professionally. If you need a
plumbing service provider in Dacula, contact us today!


