Faucets are an essential component of any home. Whether it’s in the kitchen, bathroom, or laundry room, a faucet is the key to bringing water into your house. Once you’ve made your faucet selection, the next step is to install it. This can be a daunting task for those who are new to plumbing, but it doesn’t have to be.
With a few helpful recommendations, you can have your new faucet installed and running in no time. Below are some excellent tips for setting up your new faucet.
It can be quite difficult to remove the corroded bolts connecting antique faucets to the sink, even with a basin wrench. Cut off the nuts if you don’t care about damaging the faucet. You can either use an oscillating tool with a metal-cutting blade or a rotary tool.
Cut the nut through on one side. After that, pull the nut free of the faucet body with a screwdriver. Other difficult components, such as the pop-up drain system on a bathroom sink, can also be cut off.
The majority of faucets can only be removed and installed using a basin wrench, a common plumbing instrument. With the wrench, you may access the confined space below the sink to loosen or tighten the bolts holding the faucet to the vessel as well as the nuts joining the supply lines.
If you can remove the old faucet by cutting the nuts, if the new faucet comes with a wrench, or if there is another way to install the faucet without a basin wrench, you might not need one.
When purchasing the faucet, look inside the package to see what is needed. If you do require a basin wrench, you can get one at a home improvement store or hardware store.
Water under your faucet might damage your countertop or cabinet or corrode the faucet. Even though the majority of new faucets include some sort of gasket to provide a tight seal between the faucet and the sink, it’s a smart thing to add some clear silicone caulk to the faucet and gasket to ensure a proper seal.
In the case that the connecting nuts loosen, the silicone also serves as an adhesive to keep the faucet from moving.
Connecting the supply lines so that they don’t leak used to be one of the most challenging aspects of installing a new faucet. However, the newer connectors with braided jackets have gaskets incorporated into each end, which almost ensures hookups. They are more expensive than the old-style connectors, but they are completely worth it.
For an effective seal, you don’t need to crank the nut all the way down. Simply finger-tighten the thread before adding a half-turn with a wrench. Therefore, replace those outdated supply lines with braided stainless steel connectors to spare yourself the headaches.
The packing nut can frequently be slightly loosened to release a stuck-open shutoff valve. By doing this, you may turn the valve more freely and relieve pressure on the valve stem. To stop leaks around the valve stem, retighten the valve stem nut just enough.
The part of your faucet with a screen or piece of perforated plastic covering the end is the aerator. The majority of aerators just unscrew clockwise. Several contemporary faucets come with a unique tool for removing the aerator.
Minerals or other detritus that has accumulated inside the pipes and valves are frequently released when plumbing is modified. Remove the aerator from your new faucet before turning the water back on to avoid the materials blocking it.
You have to remember that the installation of a new faucet should not be taken lightly. Following the appropriate guidelines and helpful recommendations can make the process easier and ensure a successful installation.
Hire Millennial Plumbing & Tankless for an easier and more professional
faucet installation in Dacula! We have more than twenty-five years of experience in the local plumbing industry.
We are a family-owned and operated plumbing service ready to provide a lasting solution to your plumbing issue. Contact us today to get started!
Lawrenceville / Duluth / Braselton / Monroe / Suwanee / Athens / Covington / Buford / Loganville / Dacula / Alpharetta / John's Creek
Millennial Plumbing & Tankless
470-727-6292 (call or text)
millennialplumbingandtankless@gmail.com
Serving All of Metro Atlanta